Ultra electronics XID570ie Manuel d'utilisateur

Reverse transferID card printerPrinter Driver ManualPrima3P R O F E S S I O N A L S E R I E SSecure ID card printers

Click on "Finish" to complete the installation.A reboot may be necessary, as shown below. Please wait until the driver installation is

By calling the printer properties, from the "General" tab, you can print a test page as follows: After your test page has been printed

The Wizard will ask you to connect to Windows Update: Choose "No, not this time" and click "Next". Choose "Install the s

The Hardware wizard will install the needed files automatically. Click "Finish" to close the Hardware Wizard. Congratulations! You h

2.2. Advanced Printer Configuration If the printer is used in a network environment and will be shared with other users, then click "Shared

The Color Management settings should only be used by experienced users. Prima 3 Driver Manual15

Note: The screenshot may differ depending on system configuration: On the "About" tab you will find the version of the installed printe

3. Printing Preferences 3.1. Introduction into driver and print technology In graphic user interfaces all options are shown dynamically as there ar

3.2. Layout / Setup 3.2.1. Page Orientation This option will be used to setup the page orientation between Portrait and Landscape. 3.2.2. Set-u

Set-up for use of cards with magnetic stripe or smartchip (Card Type) If the "Magstripe" or "Smartchip" checkbox is enabled, all

Welcome to the high performance printer driver for the Prima 3 series printer. This manual will help you to install, set-up and configure the driver t

Flip Axis: Here you can setup the orientation of the 'card body', which is the same as the function as former 'Image Orientation'

3.3.3. Selection of text objects to be printed on K-plane By enabling "Text", you are able to specify if all text or only black text sho

3.3.4. Selection of black & white images to print on K-plane By enabling "Black and White Images" you can specify if black or black

It is recommended to choose either black or an extreme color, which will not be used in the rest of the layout. Pure colors (like Magenta) will n

3.3.5.2. Definition of areas for printing on K-plane In combination with the special colors (see chapter 3.3.5), you can define inclusion areas:

To create a new area: Click and draw a rectangle area while pressing and holding down the CTRL-key on the keyboard. To edit an area: Select an are

Preview of defined sample K-Panel areas Measurement changes The following sample shows a change of units e.g. from Pixel to Inch Prima 3 Dr

Tip: Keeping values after disabling gives you the flexibility to design the areas before you enable this setting. Prima 3 Driver Manual27

3.3.6. PO Panel Area Definition (Peel Off) This function is designed to define areas which will be prevented from printing (e.g. signature fields). T

The peel off area is enabled by clicking the checkbox: Warning: Use of full PO area results in non-visible printout. In each case you need to defin

Table of contents 1. Legal and Copyright Information ...

3.3.6.1. Definition of areas Peel Off To create a new area: Click and draw a rectangle area while pressing and holding down the CTRL-key on the keyb

Preview of defined sample K-Panel areas Tip: Keeping values after disabling gives you the flexibility to design the areas before you enable this se

3.4. UV Panel 3.4.1. Introduction The new generation of EDIsecure XID580ie and XID590ie printers supports using of YMCK - UV (ultra violet) ribbon

3.4.2.1. Option 'Bitmap from file' This option allows to place static bitmap files on the UV plane. The bitmap must fullfil following cond

As in all the other area definitions, the content once created can be used if enabled or stored for future use if disabled: 3.4.2.3. Option &apo

3.4.3. Security Area The corner position of the printer´s unique identifier can be defined here: Prima 3 Driver Manual35

3.5. Advanced 3.5.1. Global Print Offset and K Plane Offset Global Print Offset: Here you can shift the offset of the layout in horizontal and vertic

3.5.3. Synchronization This is only required if the application controls the chip encoding. When encoding and printing batch jobs without the built

3.5.5. Card Output By enabling the "Card Output" option, the user can force or override the default setting of the printer driver. Independ

3.5.7. Sample of magnetic stripe Encoding Sending Track Information Magnetic track data is sent in the form of text strings from the application sof

6.3. Application Setup ...

4. Advanced Intelligent Printer Management (AIPM) 4.1. Introduction The "Advanced Intelligent Printer Management" was developed with a fo

4.2.1. Printers The printer line shows the printer’s status: If the printer is connected and detected by the Dispatcher and has no low level error

During the run time of DISP the card counter shows the Cards for print and Cards printed. Cards for print shows all jobs in the file list includi

Inside the Print Jobs list, the user can handle single jobs by right clicking with the mouse button as follows: - Delete (e.g. if unwanted after erro

5. Administration Center The "Administration Center" is the central point for administrative management of hardware related settings, pr

5.1.1. Re-transfer settings Ribbon Type Counts per roll (1000, 750) Temperature -3 (Low) ..Standard + 2 (High) Speed (Front/Back) -10 (Slow) .

5.1.5. Print setting transfers Load from File An already set file can be loaded Save to File Actual settings can be saved to file From Printer S

5.2. Options With the "Options" it is possible to enable / disable following items: 5.2.1. General Options Start DISP with printers i

5.2.2. Printer Driver Profiles and Printer Grouping Definition The Printer Group Definition is a unique technique powered by Digital Identification

5.2.2.1. Creation of Printer Groups After clicking on "Add" in Printer Driver Profiles and Printer Grouping, the user needs to enter a new

1. Legal and Copyright Information This product is provided on an "as is" basis, without any other warranties, or conditions, expressed or

The following two samples show how to enter the information: Sample A: As a result of this definition the printer appears in the list. 1.3.2.

Sample B: When checking the maximum number of available printers you will get the maximum performance: It is possible to add several groups incl

5.2.2.2. Deleting of Printer Groups There are two different ways of deleting Printer Groups: by Dispatcher or by use of the standard procedure in th

By clicking on the "Printing Preferences ..." button the user can view and setup the printer settings out of the Dispatcher for the highligh

5.2.3.3. Importing of Printer Driver Profiles If the customer needs to import the printer profiles he can do this by clicking on the 'Import ..

5.3. LUT / Password 5.3.1. Lookup Table Configuration Inside the Lookup Table Configuration the user has the possibility of using his own LUT tables

5.4. Driver Config This page allows setting, changing and removing the password of the Administration Center. When you click on "Reset" bu

6. Advanced Chip Encoding Framework (ACEF) Included in the printer driver is the Advanced Chip Encoding Framework, which is capable of handling a

6.1. Plugin architecture As the printer driver does not do the encoding itself but loads an additional piece of software that know how to "talk&

6.2. Software and Hardware Setup 6.2.1. Plugin Info When a plugin is installed properly and appears in the list of Installed Plugins, clicking on it

2. Installation Cont. 2.1. Printer Driver Installation Note 1: It is recommended to install the driver before you connect the printer to the PC! Not

This prevents plugins from crashing the driver by attempting to use unsupported functions of a later driver release. Plugin version The plugin&apo

This mechanism allows easy recognition of the port name of each single encoder device in a multiple printer (and encoder) environment by plugging

6.2.3. Format Templates Some applications require different encodings, depending on the layout of the card, but use one chip type. Plugins can be de

Each layout must then contain a "reference" to each format template, along with the encoding data, and the plugin would be able to unders

6.2.4. Configuration (Global Settings and Test) The most important part in the chip encoding setup is to test the communication with the encoding dev

6.3. Application Setup The chip encoding features of the driver are application independent, i.e. the application does not need to be set-up for the

Special transformations for shading, blending, winding, squeezing, skewing, twisting, outlining and anything else do process the text "as grap

6.5. Printing and encoding over network Multiple workstations on the network can print on a PC that has one or more printers attached locally and has

6.7. Precoding Introduction A special preprocessing might be required by the application before encoding or printing the card, or both. In some cas

6.8. Encoding String In an encoding environment, there are many parameters that must be configured in order to the encoding to be performed correctl

Note: Please note that you have to choose the exact name of the delivered member of our XID Printer Family. The wrong choice will result in a non

corresponding section of the application's handbook on how to set up a text field with a string that can hold both, fixed and variable data. The

The following keywords in an encoding string are reserved by the driver and processed in a special way. Keyword Option Format Description pi mandat

6.8.1. Encoding string examples 1. Simple encoding string {pi="Contact" ft="Guest" ...encoding data... } Uses the plugin &q

4. Visual appearance of encoding strings This example shows how an encoding string does appear in the application window and does not appear on th

7. Troubleshooting and known limitations Print Errors As a result of the enhanced error recovery capability of the AIPM driver, the user can decid

2 3 4 8. Appendix A Layout placement on card The printer driver uses a technology that allows you to quickly setup and adjust the document propertie

Step 1: One- or two-sided layout Check if the design is a one or two-sided layout, i.e. if the layout has only a front side or a front and back side.

Step 2: Landscape or portrait Check if the design is a landscape or a portrait design. Landscape Select = or Portrait Select = Prima 3 Driver

Step 3: Visible encoding features, Magnetic Stripe or Contact Chip If the card is not blank, it is important to select the features so the driver kn

Step 4: Flip axis The driver determines the rotation of the layout sides from the flip axis of the card, which is the axis around which the card can

Note: It is recommended to use the proposed default path. Please verify the path shown and click "Next". Click "Install"

Step 5: Rotation of the card For non-blank cards, the layout design must cope with either the contact chip or the magnetic stripe or both on each sid

Step 6: Exchange the card sides As seen in the last step, for non-blank cards, the position of the magnetic stripe or contact chip or both must be ad

Ultra Electronics Card SystemsNorth American Sales & Support Center6711 - 176th Avenue NE Redmond WA 98052Toll Free: 877 236 0933 Tel: (425) 556 9

Click "Continue Anyway" to continue the installation. Click "Continue Anyway" to continue the installation. Now the